Promise Technology FastTrak TX4660 Guide De Démarrage Rapide page 15

The LD name prompt appears.
9. Press Ctrl-Y to open a name field.
If you press any key other than Ctrl-Y, the logical drive creation is cancelled.
10. Type a name for the logical drive and press Enter.
If you leave the field blank and press Enter, a default name is used.
If you chose Fast Init to ON in step 6, the Fast Init warning appears.
11. Press Ctrl-Y to accept Fast Initialization.
If you press any key other than Ctrl-Y, the logical drive creation is cancelled.
If this is the first logical drive you have created using these selected disk
drives, the Modify Array Capacity option appears.
Taking less than the full array capacity enables you to create a second
logical drive using the same disk drives.
12. Press Ctrl-Y to open the capacity field.
If you press any key other than Ctrl-Y, the logical drive takes the full capacity
of the disk drives.
Refer to the total available capacity under Capacity (MB) in the top right
corner of the Define LD Menu. The remaining capacity is applied to the
second logical drive created using the same disk drives.
13. Type a number value for the Megabytes of capacity for your first logical drive
and press Enter.
Your new logical drive appears in the LD View / LD Define Menu.
Task 4: Creating Your Logical Drive
15