Promise Technology FastTrak TX4660 Guide De Démarrage Rapide page 18

FastTrak TX4660, TX8660, TX8668 Quick Start Guide
Logging into WebPAM
Double-click on the WebPAM icon on your desktop (right). Or,
1. Launch your Browser.
2. In the Browser address field, type in the IP address of the Host PC, as
explained below.
If you did not choose the External Security option during WebPAM
installation, use the Regular connection.
If you chose the External Security option during WebPAM installation, use
the Secure connection.
Regular Connection
• WebPAM uses an HTTP connection . . . . . . . . . . . . . . . . . . . . .http://
• Enter the Host PC's IP address . . . . . . . . . . . . 127.0.0.1 or localhost
• Enter the Port number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . :8080
• Add to launch WebPAM . . . . . . . . . . . . . . . . . . . . . . . . . . . ./promise/
Together, your entry looks like this:
http://127.0.0.1:8080/promise/ or https://localhost:8443/promise/
Secure Connection
• WebPAM uses a secure HTTP connection . . . . . . . . . . . . . . .https://
• Enter the Host PC's IP address . . . . . . . . . . . . 127.0.0.1 or localhost
• Enter the Port number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . :8443
• Add to launch WebPAM . . . . . . . . . . . . . . . . . . . . . . . . . . . ./promise/
Together, your entry looks like this:
https://127.0.0.1:8443/promise/ or https://localhost:8443/promise/
Note that the IP address shown above applies to a log-in at the Host PC. When
you log in over a network, you will enter the Host PC's actual IP address.
If you chose the Local Monitoring Only option during WebPAM installation, you
can only log into WebPAM from the Host PC. You cannot log into WebPAM over a
network.
If you chose Local Monitoring Only but you need network access, reinstall
WebPAM and be sure to uncheck the Local Monitoring Only box.
Login Screen
When the login screen appears:
1. Type admin in the Login ID field.
2. Type admin in the Password field.
18