Battery Status Indicator - brennenstuhl TORAN 4000 MBA Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 10
SWITCHING THE FLOODLIGHT ON/OFF MANUALLY
Switch the floodlight on by means of the yellow button at the back side.
The floodlight lights with 100 % brightness. By pressing the button again, the light will change
to 50 % brightness. The light intensity can also be continuously set. To do so, keep the switch
pressed – the light intensity is slowly reduced.
Proceed in the same way to increase the intensity again.
The lower the brightness selected, the longer the floodlight will burn.
If the switch is left in any of its "on" positions for longer than 3 seconds, then pressing it once
again will always turn it off.
A: On/Off and function switch
B: USB output (power bank)
C: Battery, status and charge indicator
D: DC charging socket
E: Bluetooth switch
F: Bluetooth status LED
G: Charger
CHARGING EXTERNAL DEVICES VIA USB
The floodlight offers a USB power bank function. An external device like a smartphone or
tablet can be connected to the USB port (B) and charged. The number of possible charge cycles
depends on the type of external device and on the charge level of the floodlight's battery.
During the charging process, the product is not IP55-compliant (dust-protected and protected
against splashing water).

BATTERY STATUS INDICATOR

Indicates the current battery charge, showing how much energy is still available.
The battery status indicator (C) appears automatically when the floodlight is switched on.
While the battery is charging, the status indicator (C) shows the battery's charge level. If all 5 LEDs
are lit, the battery is fully charged.
If the battery is almost empty, the floodlight flashes 5 times and the battery status indicator (C)
flashes continuously. Afterwards, the floodlight will remain on for approx. 30 minutes before the
light is switched off by the deep discharge protection function.
CHARGING THE BATTERY (D)
Charge your battery using the supplied power supply unit (G) only
1. To ensure optimum function, we recommend fully discharging the battery on the first use
and fully charging it afterwards.
2. The charging status of the battery is indicated by the battery status indicator (see description
above).
8
18P125 Mobiler Bluetooth Akku LED Strahler Toran 4000MBA 190821.indd 8
F
E
G
TORAN 4000 MBA
D
B
A
C
21.08.2019 12:36:34

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

1171470302

Table des Matières