MZ electronic EVV-A Instructions D'utilisation page 19

Starting up
The EVV-A features a 3-digit display and two buttons:
The display backlight will switch off 3 minutes after the last command given.
When the instrument is turned on for the first time, it will set up as programmed
in the factory.
The words V-A METER will run across
the display screen.
The instrument will set up for automatic
display of voltage and current. The
display will show the voltage (in volt) for
8 seconds and then switch over to the
current reading (in amperes).
EVV-A
19
English
and .
V
A
Rev. 03 – 2008