Troubleshooting - Meister MAS36VLMU Traduction Du Manuel D'utilisation Original

6. Carefully push the On/Off switch with integrated
9 – Troubleshooting
Many problems can be caused by minor errors,
which you can rectify yourself. Follow the
instructions contained in the following table.
If the fault on the cordless screwdriver cannot be
rectified please contact Customer Services.
Do not repair the cordless screwdriver yourself.
Problem
The cordless
screwdriver does
not start.
The rechargeable
battery is not
charging.
116
MW-5450090-Bedien-1903.indd 116
light switch.
The screw bit and bit holder rotate to the left, the
screw rotates out of the wood.
Possible cause
The battery power
is too weak.
The right/left rotation Push right or left
is set to the centre
position.
The charger is not
fitted correctly.
Remedy
Charge the battery
(see chapter „Charging
the battery")
fully.
Plug the connector
of the charging cable
fully and directly into
the charging socket (4)
of the cordless screw -
driver.
05.04.19 13:23