Meister MAS36VLMU Traduction Du Manuel D'utilisation Original page 114

Switching on and off
If the screw is screwed into too far, there is a risk
of over winding. This may damage the cordless
screwdriver and the workpiece.
Observe the screwing procedure and end the
screwing process before the screw head bites into
the workpiece. Tighten the screw with a hand-held
screwdriver. Carry out tests to familiarise yourself
with the operation of the power tool.
• Switching on:
Push the On/Off switch with integrated light switch (5).
The screwdriver starts. Hold the switch down while
driving the screw.
• Switching off:
Release the On/Off switch with integrated light
switch as soon as the screw has been screwed in/
out fully.
The screwdriving process is complete and the
working light goes out.
• LED working light
114
MW-5450090-Bedien-1903.indd 114
NOTE:
Risk of damage!
CAUTION!
Risk of injury!
05.04.19 13:23