Meister MAS36VLMU Traduction Du Manuel D'utilisation Original page 112

If you charge the battery incorrectly, the battery,
the charger and the cordless screwdriver may be
damaged.
– Charge the battery in an environmental
– Charge the battery when the display shows weak
– This cordless screwdriver MAS36VLMU may only
At purchasing, the battery of the cordless screw driver
is only slightly charged. For this reason, charge the
battery before using for the first time. When the LED
charge state display (2) shows weak battery power
(red lamp), charge the battery.
1. Plug the mains plug of the charger (9) into the
112
MW-5450090-Bedien-1903.indd 112
NOTE:
Risk of damage!
temperature between 0 °C and 45 °C. The
optimum temperature for charging the battery
is approximately 23 °C.
battery power (red lamp).
be loaded with the charger RSS1002-044055-
W2E or in conjunction with the charging station
MAS36VLMUB. The charger may only be operated
on a power supply with an alternating current of
100-240V~ and a frequency of 50/60 Hz.
Any use of any other charger or the use of charger
type RSS1002-044055-W2E connected to a power
supply other than the one listed may lead to
personal injury and damages.
socket.
05.04.19 13:23