Names Of The Parts - IKRA FHS 1555 Mode D'emploi

- Equipment which will be used in different
outside locations should be connected via
residual current - operated current break-
ers.
- For initial use of the hedge trimmer we
would recommend that in addition to read-
ing the operating instructions, you also
seek a practical demonstration from an
expert.
- Always ensure that all protective devices
and handles are properly fitted. Never at-
tempt to use an incomplete machine.
- Never try to use an incomplete tool or a
tool that has been modified in a way that
has not been approved.

Names of the parts

5 5
6 6
1 Safety blades
2 Protection shield
3 Wrap-around handle with ON/OFF switch
4 Rear handle with ON/OFF switch
5 Power cord connecteur
6 Strain relief
7 Impact protector (only FHS 1555)
8 Protective blade cover
GB | Operating Instruction
4 4
- Familiarize yourself with the working area
and pay attention to possible dangers
which you might not be able to hear due to
the noise of the machine.
- Avoid to use the hedge-trimmer in poor
weather conditions, especially if there is a
risk of a thunderstorm.
3
2
6
1 1
8
7