switel DFT 147 Série Mode D'emploi page 125

A standard announcement is already saved for every operating type at the
delivery stage. Therefore the answering machine is immediately operatio-
nal. At ˆAnswer and record˜ and reaching of the maximum recording capa-
city the device will automatically switch to the operating type ˆAnswer only˜.
If the answering machine is turned off the announcement for the operating
type ˆAnswer only˜ will be played after approx. 10 rings.
You can see from the corresponding symbol on the display of the handset
that the answering machine is turned on.
When listening messages through the handset date and time of the respec-
tive message will be shown. For this reason date and time have to be set
correctly (menu: Clock/Alarm / Date & Time).
The display on the base station shows the operating state and gives you
further information:
−−
XX
LA
A1/A2
FF
Lx
New messages are being indicated by the symbol
handset.
Accessing the answering machine through the base
Through the base station you can turn the answering machine on or off,
playback and delete messages. For the respective function please refer to
the chapter ˆOperating elementsˆ in this user guide.
Turning the answering machine on/off from the handset
Menu
F / H
F / H
Dashes steadily on: Answering machine is off.
Flashing: Answering machine is on, date/time not set
(on first use).
Digits steadily on: Number of old (already heard)
messages.
Flashing digits: Number of new messages.
Flashing: Remote access in progress (handset or
remote phone)
Playing outgoing message
(A1=Answer & Record, A2=Answer only).
Flashing: TAM memory is full.
While setting the TAM−volume on the base: x=volume
level.
At resetting the base station to the delivery state all own announ-
cements as well as existing messages will be deleted.
Press the Menu softkey.
Select Answer Machine and press Select.
Select TAM On/Off and press Select.
in the display of the
35
125