Korg Grandstage 73 Manuel D'utilisation page 19

3. Press the EDIT button once more to continue
saving.
Note:
If a USB storage device is not connected to the
USB A port, the message "No valid media" will be
displayed on the third line of the display, and the
save operation will be cancelled. If this happens,
connect a USB storage device, select "Save .FAV
File" once more using the VARIATION knob, and
perform step 3.
4. The words "Set File Name" and "Save [Hold EDIT]"
will be alternately shown on the middle line of
the display, and the file name will be shown on
the third line.
5. Turn the VARIATION knob to select the characters
to edit (the selected character will blink), and use
the LEVEL knob to change the blinking character.
The name is "GS0000" by default, and the leftmost character
"G" will blink. Filenames can be up to six characters long.
Note:
Press the EXIT button if you wish to cancel the
renaming of the filename. "[Press EDIT]" will be
displayed.
6. After you have finished naming the file, hold
down the EDIT button for around one second to
save the data.
7. The words "OK?[Press EDIT]" will blink on the
third line of the display, to reconfirm that you
wish to save the data.
Note:
To cancel the save operation, press the EXIT button.
This will return the display to a point three steps
back.
8. Press the EDIT button quickly to begin saving the
data.
9. When the save is completed, the word
"Completed" will be shown on the third line of
the display.
Note:
If a file with the same name already exists where
the file will be saved, the message "File Overwrite"
will be shown on the second line of the display. To
overwrite the file, press the EDIT button.
To cancel overwriting the file, press the EXIT
button. The display will return to the "Set File
Name" screen. Change the file name, and then save
using step 6 again.
10. Press the SYSTEM or EXIT button to finish the
system settings.
Storage media that can be used
USB storage devices, such as MS-DOS FAT16 or FAT32-
formatted flash media or disks
Maximum usable storage capacity
FAT32: Up to 2 TB (2,000 GB)
FAT16: Up to 4 GB
When saving to storage media, the "KORG/Grandstage" directory
will automatically be created in the media's root directory. This
directory will be used exclusively by the Grandstage. When using
the "Save .FAV File" function, a file with the .FAV extension will
be created in this directory.
If the storage media is not formatted as MS-DOS FAT16 or
FAT32, the message "No valid media" will be shown. Format the
storage media on your computer. If there is very little free space
remaining on the storage media and data cannot be saved, the
message "No free space" will be displayed. In this case, delete
any unnecessary files from the storage media to free up disk
space, or use a different storage media with more capacity.
When loading a .FAV file from storage media, only the .FAV
files in the "KORG/Grandstage" directory can be shown and
selected for loading. Note that if you change the directory,
folder hierarchy or filename using your computer, you will
no longer be able to load the file.
The Grandstage recognizes the .FAV file extension. If you
change the file extension on a computer or other device, the
Grandstage will recognize this as an undefined file, and will
not be able to load it. The filenames saved by the Grandstage
are six characters long. If you add more characters to a
filename using your computer or other device, you may no
longer be able to display any of the filenames on the storage
media.
Load .FAV File (loading the favorite data)
This loads the favorite data (64 favorites) into the Grandstage's
memory, which were saved to a USB storage device using the
favorite data save function.
This will load the favorite data into memory. Any factory-set
default data or favorite data that was edited and saved on the
Grandstage will be overwritten, and your favorites will be
lost. If you want to keep your favorite data, save the data to
a USB storage device (aftermarket product).
1. Plug the USB storage device that contains the
saved favorite data into the USB A port of the
Grandstage.
Note:
The USB A port on the Grandstage supports hot-
plugging (meaning that the USB media/cable can be
removed while the power is turned on).
2. Press the SYSTEM button, and select "Load .FAV
File" using the VARIATION knob.
"[Press EDIT]" will blink on the third line of the display.
Note:
If you wish to cancel the load operation while
"[Press EDIT]" is blinking, select a different system
parameter using the VARIATION knob, or press the
SYSTEM or EXIT button to finish system settings.
19