Publicité
Les langues disponibles
Les langues disponibles
5
2
1
3
1
How you connect your HP Media Vault to your network
depends on your network configuration.
This example shows a router
HP Media Vault
Desktop PC
Laptop with a wireless adapter
Broadband modem
The HP Media Vault comes pre-configured to use DHCP;
therefore, using a DHCP-enabled router is highly
recommended. By default, most routers include a DHCP
server. For more information, check your router
documentation.
4
If you have wireless functionality on your network,
ensure that you correctly enable the security settings on
your networking equipment.
2
1. Plug one end of the power cord into the HP Media Vault's
power receptacle and the other end into an electrical
outlet.
2. Connect one end of the Ethernet cable to the HP Media
Vault and the other end to an available Ethernet port on
your router or switch.
1
HP Media Vault
connecting the following:
Publicité
