Accuracy Control - Futech Multicross 5 Super Vision GREEN Mode D'emploi

Monitor horizontal levelling
1. Choose a room ±10 m long
2.
Place the instrument next to wall no. 1.
3.
Switch on the instrument and let it self-level.
4.
Mark the horizontal line in the middle of the cross on wall no 1.
5.
Turn the instrument through 180° and mark the laser beam in the middle of the
cross on wall no. 2.
6.
Move the instrument as close as possible to wall no. 2.
7.
Adjust the height of the laser so that the middle of the laser cross is on the wall
no. 2 marker.
8.
Then turn the instrument through 180° and note the di erence between the
middle of the laser cross and the marker on wall no. 1.
9. This di erence should not exceed 2 mm.
10. NB: The tolerance depends on the distance of the walls between which the
inspection has been carried out. This distance should be multiplied by 2.
Hence, if the instrument has an accuracy of 2 mm / 10 m, then in our example the
calculation is: 10 m distance x 2 = 20 m. Tolerance is 4 mm / 20 m.
Multicross_5_SV_GREEN_New.indd 47
www.laseto.be
Type: Multicross 5 Super Vision
Art. No.: 039.05
Power: 6V
/ 540mA
• Max Output:
Insert 4x 1,5V Alkaline batteries. Type AA
Use batteries of the same brand.
Keep Dry
DO NOT STARE INTO THE
BEAM OR VIEW DIRECTLY
CAUTION LASER RADIATION
WITH OPTICAL INSTRUMENTS.
CLASS 2M LASER PRODUCT
ACCORDING TO
IEC / EN60825-1: 2001
Made in Taiwan

ACCURACY CONTROL

Multicross 5 Super Vision-GREEN
11/06/13 17:38
EN
47