Using The Menu - Sony VPH-G70Q Mode D'emploi

Using the Menu

The projector is equipped with an on-screen menu for
making various adjustments and settings.
The language used in the menu can be changed to
French, German, Italian, Spanish, Japanese or Chinese.
For details, see "LANGUAGE" on page 30 (EN).
Basic Menu Operation
1
Press the MENU key.
The menu display appears.
The menu presently selected is highlighted in blue.
I N P U T - A
V I D E O : V I D E O
INPUT
SELECT I N P U T - A
I N P U T - B
PIC
CTRL S W I T C H E R : S W ' E R 1 - 1
INPUT
SETTING
SET
SETTING
INPUT
INFO.
SEL: SET: EXIT: MENU
ENTER
2
Use the v or V keys to select a menu, then press
the b key or the ENTER key.
The selected menu appears.
The setting items that are indicated in white
cannnot be selected.
Menu items Setting items
V I D E O
V I D E O M E M O R Y : O F F
INPUT
SELECT
C O N T R A S T 8 0
PIC
CTRL
B R I G H T 5 0
C O L O R 5 0
INPUT
SETTING
H U E 5 0
S H A R P 5 0
SET
SETTING
RESET: RESET
INPUT
INFO.
SEL: SET:
ENTER EXIT: MENU
3
Use the v or V keys to select a setting item, then
press the b key or the ENTER key.
The adjustment menu or the setting menu (pop-up
menu) appears.
If there are two or more pages for a menu
The $ indication appears below the bottom item.
To go to the next page, move the cursor to the
bottom item with the v key, then press the v key.
To go back to the previous page, move the cursor
to the top item with the V key, then press the V key.
4
Make adjustment or setting on the menu.
22
(EN)
To change the adjustment level
To increase the level, press the V or b key.
To decrease the level, press the v or B key.
Then press the ENTER key to store the adjusted level.
The original screen is restored.
C O N T R A S T : 8 0
To select an item
Use the v or V key to select an item in a pop-up menu,
then press the B key or the ENTER key. The selected
setting is stored and the pop-up menu disappears.
Pop-up menu
V I D E O M E M O R Y : O F F
INPUT
SELECT 1
C O N T R A S T 2
PIC
CTRL B R I G H T 3
C O L O R 4
INPUT
SETTING H U E 5
S H A R P
SET
SETTING
INPUT
INFO.
SEL: SET:
ENTER EXIT: MENU
For details on setting individual items, see the relevant
menu pages.
To clear the menu display
Press the MENU key.
The menu display also disappears automatically if no
key is pressed for about one minute.
To reset the settings that have been
adjusted
Press the RESET key. "Reset complete!" appears on
the screen and the settings appearing on the screen will
be reset to the factory preset or service adjusted levels.
Memory of the settings
The settings in the menus are automatically stored in
the projector memory. You can also store the settings
by pressing the MEMORY key.