Extended Warranty; Stopwatch - Timex 02W-095000 Mode D'emploi

EXTENDED WARRANTY

Available in U.S. only. Extend your warranty for an additional 4 years from
date of purchase for $5. You can pay with AMEX, Discover, Visa or MasterCard
by calling 1 800-448-4639 during normal business hours. Payment must be
made within 30 days of purchase. Name, address, telephone number, purchase
date, and 5-digit model number required. You can also mail a check for $5 to:
Timex Extended Warranty, P.O. Box 1676, Dept. EF, Little Rock, AR 72203.
Please read instructions carefully to understand how to operate your Timex
watch. Your model may not have all of the features described in this
booklet.
FEATURES AND BASIC OPERATION
1. Date with MM-DD format (month/day)
2. 24-Hour Stopwatch with Split time
3. 3 Alarms (Daily or Weekly) and Hourly Chime
4. 24-Hour Countdown Timer
5. Dual Time (Digital 2nd Time Zone)
6. INDIGLO night-light
®
SET
(To save
changes and
exit setting)
MODE
(Proceed to
next step)
Button functions shown with setting functions in parentheses
TIME
To set time and date
1. To start your watch remove the plastic guard from under the crown, then
press the crown in against the case. The second hand will begin advancing
in one-second intervals.
2. Pull the crown out all the way and turn to the correct analog time. Push the
crown in to restart the analog watch.
3. From Time of Day mode in the digital watch, press and hold SET. The
Seconds can be seen flashing.
4. Press ST/STP to set Seconds to zero adding one minute if seconds are
"30" or greater.
5. Press MODE to set Hours, as indicated by its flashing. Press ST/STP to
advance the Hours setting. Press and hold to increment quickly.
6. Press MODE to set Minutes, as indicated by its flashing. Press ST/STP to
advance the Minutes setting. Press and hold to increment quickly.
7. Press MODE to set the Month number, as indicated by its flashing. Press
ST/STP to advance the Month setting. Press and hold to increment
quickly.
8. Press MODE to set the Date, as indicated by its flashing. Press ST/STP to
advance the Day setting. Press and hold to increment quickly.
9. Press MODE to set the Day, as indicated by the flashing segment. Press
ST/STP to advance the Day setting. Press and hold to increment quickly.
10. Press MODE to set the Time Format, as indicated by its flashing (12H or
24H). Press ST/STP to toggle the setting.
11. Press SET to exit Time Set.
Note: 12-Hour time has no indicator in the morning and a "PM" indicator after
Noon.
Note: To peek at the Month/Date setting from Time mode, press and hold
ST/STP.

STOPWATCH

Use this function for timing events.
1. Press MODE until "SP" appears.
2. Press ST/STP to start timing.
3. With the stopwatch running, press SET to record a Split time. The
stopwatch will continue timing in the background.
®
4. Press SET to release the display and show the current running
stopwatch time.
5. Press SET to record another Split time.
6. Press ST/STP to pause the timing.
7. Either press ST/STP to resume timing, or press SET to reset the Stopwatch
to zero.
Note: If the Stopwatch was paused when the display was showing a Split time,
the first press of SET will show the final recorded time, and the second press
will reset the Stopwatch to zero.
LAP 1 = 7.11
SPLIT 1 = 7.11
ST/STP
(Increase value. Hold
to increase rapidly)
CROWN
ALARM
INDIGLO Button
®
To turn on/off or to set one of the 3 Daily alarms, or to turn on/off an hourly
chime.
1. Press MODE until "A1" (Alarm 1) appears.
2. Press SET to access "A2" (Alarm 2), "A3" (Alarm 3), "CH" (Hourly Chime),
or "BP" (Button Beep)
3. Press ST/STP to toggle the Selected Alarm (AL graphic) on/off, to toggle
the Hourly Chime (CH graphic in a dark box) on/off, or to toggle Button
Beep ON/OFF.
4. To Set an Alarm, press and hold SET. The Alarm field flashes.
5. Press ST/STP to select one of the 3 alarms to set.
6. Press MODE to go the Hours setting as indicated by its flashing
7. Press ST/STP to advance the Hours setting. Press and hold to increment
quickly.
Note: The Hours will be presented in the same format (12- or 24-hour time) as
the time setting.
8. Press MODE to set the Minutes as indicated by its flashing. Press ST/STP
to advance the Minutes setting. Press and hold to increment quickly.
9. Press MODE to select the applicable Time Zone, as indicated by its
flashing (T1 or T2). Press ST/STP to toggle the setting.
10. Press MODE to select the alarm Frequency, as indicated by its flashing
"DA" (Daily) or "WE" (Weekly). Press ST/STP to toggle the setting.
11. Press MODE to turn the alarm "ON" or "OFF". Press ST/STP to toggle
the setting.
12. Press SET to exit the Alarm Set.
13. When the alarm sounds, press ANY button to silence the alert, or it will
stop automatically in about 20 seconds.
COUNTOWN TIMER
Use this function for timing events or tasks that have a defined end.
1. Press MODE until "TR" appears.
2. To Set the Timer, press and hold SET. The Hour digit flashes.
3. Press ST/STP to advance the Hours setting. Press and hold to increment
quickly.
4. Press MODE to set the Minutes as indicated by its flashing. Press ST/STP
to advance the Minutes setting. Press and hold to increment quickly.
5. Press MODE to set the Seconds as indicated by its flashing. Press
ST/STP to advance the Minutes setting. Press and hold to increment
quickly.
1
ENGLISH 02W-095000
LAP 2 = 7.50 LAP 3 = 7.08
SPLIT 2 = 15.01
SPLIT 3 = 22.09
LAP 4 = 7.30
SPLIT 4 = 29.39