General; Types; Type Code; Type Plate - Sera CVD Série Mode D'emploi

Systèmes de dosage – construction verticale
CVD 1 (s) / CVD 2
Notice d'utilisation

General

CAUTION !
Operating instructions of the system subassemblies
(pump, fittings etc.) on the enclosed data carrier must be
observed by all means! (please see Chapter 16, page 19)
Pay attention to the general local instructions which apply for
commissioning and operating sera products.
sera products are delivered ready for operation. Carefully read
these instructions and especially the safety instructions herein
contained before putting the system into operation.
When mounting the system the owner is responsible that the
requirements according to the regulations on pressure vessels
2014/68/EU as well as the valid regulations for prevention of
accidents are observed.

Types

2.1

Type code

Example: Dosing system, vertical construction
(Compact Vertical Dosing unit) CVD1 – 60.1
CVD
1 60.1
CVD 1 60.1
CVD 1 60.1
2.2

Type plate

Fig. 01 Type plate (example)
2.3

Materials

The materials used are stated in the product description in the
Appendix. The suitability of the materials for the pumped me-
dium must be checked.
2.4

Performance and design data

The performance and design data are indicated in the product
description in the Appendix.
TA450-11 / fr/en / 01.2017 / PM
Construction
Number of pumps
Size
(exemple)
www.sera-web.com
2.5

Noise measurement

According to DIN 45635 the sound pressure level measured of
the dosing system is between 50 and 70 dB (A).
2.6

Water quality

Water used for start-up, maintenance and closing down must
be similar to drinking water, i.e. chemically neutral, free from
solid and suspended matters and disturbing ion concentra-
tions.
CAUTION !
Note the compatibility of the chemical with water and take
appropriate measures, if necessary.
Pay attention to the safety data sheet of the medium.

Safety instructions

3.1

Note on quality

Read these operating instructions attentively before starting up
or maintaining the system. Observance of these operating in-
structions and, in particular, safety instructions, helps to
•
Avoid danger to staff, machines, and environment.
•
Increase the reliability and service life of the equipment
and the entire system.
•
Reduce expenses for repairs and downtimes.
The sera quality management system is certified according to
ISO 9001:2008.
sera products comply with the valid safety requirements and
accident prevention regulations.
CAUTION !
Always keep these operating instructions within reach at
the workplace!
CAUTION !
Pay attention to the safety data sheet of the pumped me-
dium! The owner must take corresponding accident pre-
vention measures to protect operating personnel from
danger by the pumped media used!
Sous réserve de modifications techniques !
Subject to technical modifications!
29