Publicité
Les langues disponibles
Les langues disponibles
Introduction
To enjoy your new electric garden shredder as long as
possible, please read carefully the Operating Instructions
and the attached safety instructions before using it.
Further, we recommend keeping the Operating Instructions
to recall the product features in the future.
Within the continuous product development, we
reserve the right to make technical changes to
improve it.
This document represents translation of the original
Operating Instructions.
Supply includes
Take the machine out of the transport package and check
whether there are the following parts:
GH 2400 Garden Shredder
2 pcs of transport wheels with wheel covers
Axis
Feeding help
Collection box
4 screws with washers
Allen key
Spanner
Original Operating Instructions
Please contact your dealer if any parts are missing or are
damaged. When assembled, the machine weighs 14 kg.
Take the machine out of the transport package in two
people if necessary.
Machine specification
Robust garden shredder with a knife cutting mechanism.
Ideal for trees and bushes. Shredded material is
effortlessly ground by the steel rotary knife, accelerating
the composting process. Automatic pulling-in of shredded
material within Ø 40 mm.
Pic. A
1.
Feeding help
2.
Electric garden shredder
3.
Adjusting screw to control the shredded material
size
4.
Tank cover
5.
Transport wheel
6.
Feet
7.
Collection box
8.
Overload protection
9.
ON/OFF switch
10.
Cover opening screw
Technical specifications
GH 2400 #94060 ELECTRIC GARDEN SHREDDER
Voltage/frequency:
Engine output:
Max. engine speed:
Protection type/class:
Max. branch diameter:
Collection box capacity:
Noise:
Dimensions LxWxH:
Weight:
*
Noise information
Measured values learnt according to 2000/14/EG
(1.60 m height, 1 m distance) – measurement tolerance +-
3dB
**
The S6 40% operating mode means a load profile of 40
seconds of load and 60 seconds of idle running. Long-term
operation is admissible for practical use.
230V~50Hz
2,500W (P1;S6 40%)**
-1
4,,050 per min
IP24 / II
max. 40mm
50l
L
111 dB*
WA
550x450x930 mm
14kg
General safety instructions
Read carefully these Operating Instructions. Familiarise
with the controls and proper use of the machine. Keep the
Operating Instructions for future reference.
The machine meets the EN 61000-3-11 requirements
and is subject to special conditions for connection.
That means that using the machine on any points of
connection is not allowed.
The machine may lead to temporary voltage spikes
under inappropriate system conditions.
The machine has exclusively been designed to be
used on points of connection not exceeding the
maximum allowable system impedance Zmax = 0.233
Ω.
As the user, you must make sure, after an agreement
with your energy supplier if necessary, that your point
of connection where you want the machine to be
operated meets the requirement specified above.
Safe work
Keep the place of your work clean!
Any mess in the place of your work may result in injuries.
Consider the environment influences
Do not expose the machine to rain.
Do not use the machine in a moist or wet environment.
Provide adequate lighting.
Do not use the machine near flammable liquids or gases.
Keep other persons in a safe distance!
Do not let other persons, especially children, touch the
machine and the cable. Keep them in a sufficient distance
from the place of your work.
Store the machine properly!
A machine that is not being used must be kept in a dry and
locked place, inaccessible to children.
Do not overload the machine!
Work within the specified power range.
Use the right machine!
Do not use the machine for purposes for which it has not
been designed.
Take care of your machine!
Comply with the servicing regulations and instructions.
At regular intervals, check the machine cable and have it
replaced by an authorised professional if damaged.
At regular intervals, check the extension cable and replace
it if damaged. Keep the handles dry, with no oil and
grease.
Be careful!
Pay attention to what you are doing. Work reasonably. Do
not use the machine when you are tired.
WARNING!
Using any other accessory equipment may represent a risk
of injury for you.
Have your machine repaired by an electrician only!
This machine meets the applicable safety provisions. Any
repairs may only be executed by an electrician, using
original spare parts, otherwise, the user could face a risk of
injury.
9
Publicité
