Technical Data - Mettler Toledo InPro 7000-VP Série Manuel D'utilisation

6
specified for the individual product. Please check that the details given in
the Certificate of Quality match the sensor label. For each sensor, the rele-
vant cell constant has been determined individually in an ultrapure water
system at 25 °C (77 °F) during the manufacturing process, and the value
documented in the accompanying «Certificate of Quality».It is not neces-
sary to re-calibrate the sensor before initial operation.
Packaging
The packaging consists of cardboard and plastic material.
Keep the packaging for later use during storage or transportation of the sen-
sor. Should you wish to dispose of the packaging material, please
observe your local regulations as well as those data and instructions given
in Chapter 5.3 of this manual.
Unpacking and inspection
Please check the sensors immediately during unpacking in order to deter-
mine possible damage or missing items. Any irregularities should imme-
diately be reported to your carrier and to your supplier.
1.3

Technical data

Technical data
Wetted
materials
Temperature
range
Process adaption/
connection
Max. pressure
at 25 °C (77 °F)
Sterilizability
Protection class
(VP connector)
InPro 7000-VP Series
52 002 091
InPro 7000-VP InPro 7001-VP
Titanium, PEEK, 316L SS
PVDF, Viton (1.4435),
PEEK, Viton
–10...100 °C –10...100 °C
(14...212 °F) (14...212 °F)
3 / " NPT PG 13.5
4
1" NPT conduit
34 bar 17 bar
(500 psi) (250 psi)
Non-sterilizable max. 131 °C
(max. 268 °F)
IP68 IP68
© 07 / 12 Mettler-Toledo AG, CH - 8606 Greifensee
InPro 7000-VP Series
InPro 7002-VP InPro 7005-VP
316L SS, Titanium, PEEK,
(1.4435), Viton, PTFE-
PEEK coated 316 SS
–10...120 °C –10...100 °C
(14...248 °F) (14...212 °F)
Tri-Clamp 3 / " NPT
4
(1.5" & 2")
Tuchenhagen
Varivent
(DN 40-DN 125)
31 bar 17 bar
(450 psi) (250 psi)
max. 150 °C Non-sterilizable
(max. 312 °F)
IP68 IP68
(sensor: IP65)
Printed in USA