Solo 460 Li Notice Originale page 9

Pulvérisateur à batterie
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
3.6 Before and during work
 Only use the device in an operationally safe
condition. Check it before any use. If any
irregularities, damage, leaks, or limited
function occurs, stop using the device and
contact the seller at once.
 The sprayer must only be operated by one
person. There must be no other person within
a radius of 15m [approx. 16 yards].
4 Operating and function parts
1
Adjustable spraying nozzle
2
Spray trigger button
3
Hand support
4
Tank screw connection
5
Spraying agent tank
6
USB charging cable
7
Connection socket for charging cable
8
Intake tube
9
Filter with weight
Electrical devices are not intended for
domestic waste. Hand in the device and
accessories to the official disposal points
for electrical devices.
5 Charging the battery
Charge the device before first use. For this,
connect the USB plug of the charging cable to a
USB power source of 5 V and the plug of the
charging cable to the connection socket (7) of
the battery-powered sprayer. The charging time
is 1.5 h - 2 h. Overcharging is not possible.
6 Preparing the spray liquid and filling the
spray tank
Prepare the spray liquid according to the
instructions of the chemical manufacturer.
Only prepare dangerous spraying agent
outdoors, never inside any living rooms, stables
or storage rooms for food and feedstuffs.
To fill in the spraying liquid, open the tank
screw connection (4) by turning it anti-
clockwise. Do not use any tools for this!
Remove the entire spraying head (with the
intake tube (8) and filter with weight (9) from the
spraying agent tank.
Fill the tank up to the mark "1Ll" on the side of
the spraying agent tank.
Overfilling the tank or spills can contaminate
public waterways, rain- and storm water
channel and must be avoided.
Wipe off spilled spray liquid without delay.
After filling, insert the spraying head again and
screw it on tightly clockwise to prevent spraying
agent from escaping.
7 Application
Do not operate the battery-powered sprayer
without liquid. Running dry may damage the
device.
7.1 Spraying
Do not use the sprayer in wind or rain.
Check the direction of the air movement before
starting work and spray with the air movement,
not against it.
Hold the battery-powered sprayer by the hand
support (3).
Point the spraying nozzle at the target object
from a distance of approx. 50 cm.
Push the spray trigger button (2) to start
spraying, release the button to stop spraying.
ENGLISH 3

Publicité

Table des Matières
loading

Table des Matières