Installation Procedure - Toto MS642 Manuel D'installation

1. Open the Unifit Rough-In packaging. Follow the
Unifit Rough-In Installation instruction.
2. Place the template into position and follow its
instructions to prepare for installing the toilet
bowl.
Do not move the Unifit Rough-In on the
NOTICE
Floor Flange after wax seal is set. If this
notice is disregarded, discard the wax
ring and replace with new wax ring.
3. Place the toilet bowl over the Unifit
Rough-In and align the holes on the side
of the toilet to the lines marked "A" on
the floor.
Insert the toilet all the way into
NOTICE
position. If this notice is disregarded,
leakage may result.
4. Align the toilet perpendicular to the
back wall and parallel to side walls;
it should not sit crooked or diagonal
(ill. 4).

INSTALLATION PROCEDURE

4
ill. 1
ill. 2
A
A
ill. 3
A
ill. 4
A
A
A
A