Agri-Fab 45-03201 Notice D'utilisation page 9

5. (Figure 16) Place the assembled rear hopper tube and
lower hopper side tubes into the bottom of the hopper
bag.
6. (Figure 17) Attach the ends of the lower hopper side
tubes to the inside of the upper hopper side tubes using
two 3/8" x 1/2" clevis pins (O) inserted from the inside,
and two 3/32" hair cotter pins (N).
LOWER HOPPER
SIDE TUBE
UPPER HOPPER
SIDE TUBE
3/32" HAIR
COTTER PIN (N)
3/8" x 1/2"
CLEVIS PIN (O)
HOPPER BAG
BOTTOM
ENGLISH
7. (Figure 18) Insert the bag frame strap into the stitched
sleeve along the front edge of the bag bottom.
8. (Figure 18) Assemble the bag frame strap to the lower
hopper side tubes using two 1/4" x 1-1/8" clevis pins
(P) and 3/32" hair cotter pins (N).
16
BAG FRAME STRAP
1/4" x 1-1/8"
CLEVIS PIN (P)
9. (Figure 19) Secure the bag corners around the lower
hopper side tubes by snapping the bag flaps to the bag
bottom on both sides.
17
SNAP
9
18
3/32" HAIR
COTTER PIN (N)
19
FLAP