Setting Up Equipment; Connecting The Outdoor Sensor Manually - ADE WS 1823 Mode D'emploi

Setting up equipment

The base station has a foot.
− Set up the base station as close to a window as
possible. Here, the reception will generally be best.
The wireless outdoor sensors have a hanging loop on the
back.
− Set up or hang the outdoor sensors in a place where
they will be protected against direct weather effects
(rain, sun, wind, etc.). Suitable locations are, for
example, under an awning or in a carport.

Connecting the outdoor sensor manually

If no outdoor sensor data are shown on the display 3
minutes after inserting the batteries, you can manually
connect the outdoor sensor to the base station.
1. Use the CH button to select the desired outdoor
sensor. Note the display.
2. Press and hold down the CH button until the display
flashes rapidly.
Thermometer/Hygrometer WS 1823
The LCD screen is designed
for an "optimum view".
The display can best be read
off at an angle of 45°.
45°
39