Being Awakened; Switching The Alarm Function On/Off - ADE WS 1823 Mode D'emploi

Being awakened

At the set time, you will be woken by an alarm signal,
which will become more intense as the waking time
increases.
Switching the alarm off completely
− Press any button (except SNZ) to stop the alarm. After
24 hours, the alarm will be triggered again.
Auto-stop function
If you do not press a button, the alarm switches off
automatically after 2 minutes. After 24 hours, the alarm will
be triggered again.
Repeat alarm (snooze function)
− Press the SNZ/LIGHT button once when the alarm
signal sounds.
The alarm signal will be muted and the alarm symbol
and Z will appear flashing on the display.
Z
After 5 minutes, the device switches on again and wakes
you up again. This procedure can be repeated multiple
times.

Switching the alarm function on/off

− Based on the current time indication on the display,
press ALARM twice to switch the alarm function on
and off.
As soon as the display no longer shows the alarm symbol
, the alarm function will be disabled.
Thermometer/Hygrometer WS 1823
43