Helios MultiZoneBox KWL-MZB Notice De Montage Et D'utilisation page 26

Installation and Operating Instructions
EN
D
MultiZoneBox - KWL-MZB
Unit
Click on the "Unit" button, this will open the following submenu.
Unit name
"Unit name" you can enter a name, e.g. Apartment 3, Maier or similar here.
Unit info
"Unit info" you can enter further unit information, e.g. Building 1 here.
Unit address
"Unit address" you can enter a number between 1 and 255 here (only required for control via the KWL MZB ZR).
Control element
"Control element" you can select which control element (optional accessories) you have connected here (default "No
control element").
Function Switch contact
"Function Switch contact" is used for special functions such as the detection of e.g. collective alarms ("Deactivated"
as standard).
Ventilation
Click on the "Ventilation" button, this will open the following submenu.
Minimum ventilation level
"Minimum ventilation level" you can determine whether the MZB completely closes the air shutter or runs at least on
basic ventilation here.
Basic ventilation
"Basic ventilation" you can enter the calculated basic ventilation volume flow here (ventilation for moisture protecti-
on).
Ventilation level 1
"Ventilation level 1" you enter the calculated reduced ventilation value here.
Ventilation level 2
"Ventilation level 2" you enter the calculated nominal ventilation value here.
10
Fig .19
Fig .20