Helios MultiZoneBox KWL-MZB Notice De Montage Et D'utilisation page 25

Installation and Operating Instructions
MultiZoneBox - KWL-MZB
3 .2 .2 Access to KWL-MZB via the "MultiZone configuration software"
Connect the MZB to your PC via a USB data cable.
Start the "MultiZone configuration software" application.
Click on the "Establish connection via USB" button.
This will open the main menu of the software.
1 . Current values
Click on the "Current values" button.
This will open the submenu.
Ventilation
"Ventilation" you can view the current ventilation level, setpoint and actual values for supply and extract air as well as
the respective shutter position here.
Sensor
"Sensor" you can view the current measured value(s) here.
Firmware version
"Firmware version" you can view the installed version here.
Errors
"Errors" you can view the current error status of the MZB and the error history for the last 5 errors of the MZB here.
2 . Configuration
Click on the "Configuration" button.
This will open the configuration menu.
9
EN
Fig .16
Fig .17
Fig .18