Transport, Packaging And Storage; Commissioning, Operation - WIKA 432.55 Mode D'emploi

5. Transport, packaging ... / 6. Commissioning ...

5. Transport, packaging and storage

5.1 Transport
Check the pressure gauge for any damage that may have been
caused by transport. Obvious damage must be reported immediately.
5.2 Packaging
Do not remove packaging until just before mounting.
Keep the packaging as it will provide optimum protection during
transport (e.g. change in installation site).
5.3 Storage
Permissible conditions at the place of storage:
Storage temperature: -20 ... +70 °C
„
Protect the pressure gauge from dust.

6. Commissioning, operation

The pressure gauge should be kept in its packing until installation.
„
The gauge should be protected from external damage during
storage.
On removal from the packaging, and during mounting, particular
„
care must be taken to avoid damage and any mechanical
deformation to the diaphragm.
WIKA operating instructions pressure gauge, model 432.55
GB
9