Product Description And Specifications; Intended Use; Product Features - Bosch GCM 8 SDE Professional Notice Originale

OBJ_BUCH-2303-005.book Page 28 Thursday, December 15, 2016 11:35 AM
28 | English
Symbols and their meaning
 Danger area! Keep hands, fingers or
arms away from this area.
Observe the dimensions of the saw blade.
The hole diameter must match the tool
spindle without play. Do not use reducers
or adapters.
Shows the rotation direction of the SDS
bolt for tightening the saw blade (counter-
clockwise) and for loosening the saw
blade (clockwise).
Clamping lever shut:
The set bevel angle of the tool arm is
locked.
Clamping lever open:
Adjusting bevel angles is possible.
Product Description and
Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.

Intended Use

The power tool is intended as a stationary machine for making
straight lengthways and crossways cuts in wood. In this, hori-
zontal mitre angles from –52° to +60° as well as vertical bevel
angles from 47° (leftward) to 47° (rightward) are possible.
The capacity of the power tool is designed for sawing hard-
wood and softwood, as well as particle and fibre board.
When using appropriate saw blades, sawing aluminium pro-
files and plastic is also possible.
1 609 92A 34B | (15.12.16)

Product Features

The numbering of the components shown refers to the re-
presentation of the power tool on the graphic pages.
1 Slide device
2 Chip ejector
3 Transport handle
The table shows the rec-
4 Adjusting screw of depth stop
ommended speed setting
5 Laser protection cap
depending on the mate-
6 Roller
rial to be worked: alumi-
7 On/Off switch
nium, plastic, wood.
8 Handle
9 Locking switch for releasing the tool arm
10 Blade guard
When sawing vertical
bevel angles, the adjust- 11 Retracting blade guard
able fences must be
12 Saw blade
pulled outwards or
13 Saw-table extension
removed completely.
14 Fence
15 Adjustable fence
16 Saw table
17 Clamping lever of the saw-table extension
18 Scale for mitre angle
19 Insert plate
20 Locking bracket
21 Locking knob for various mitre angles
22 Mitre detent lever
23 Tilt protector
24 Mitre angle indicator
25 Detents for standard mitre angles
26 Mounting holes
27 Recessed handles
28 Locking screw of the adjustable fence
29 Material clamp
30 Chip deflector
31 Stop for standard 45°, 22.5° and 33.9° bevel angles
32 Scale for bevel angle
33 Right bevel angle indicator
34 Depth stop
35 Locking screw for slide device
36 Hex key (5 mm)
37 Mounting holes for material clamp
38 Material stop*
39 Transport safety-lock
40 Speed regulator
41 Laser warning label
42 On/Off switch for laser (cutting line indication)
43 Clamping lever for any bevel angle
44 Left bevel angle indicator
45 Leg extension
46 Stop for 0° standard bevel angle
47 Spindle lock
48 Hex socket screw for mounting of saw blade
Bosch Power Tools