Publicité
Assembly - Fases de montaje - Montage
230Vac
Technical characteristics
The system allows to set up call display installations for up to 12/24 calls, and it consists of a display for
12 calls (item No. 392001) or for 24 calls (item No. 392002).
Both displays are delivered with flush mounting box and fixing frame; the front frame (item No. 331211)
must be purchased separately.
The main characteristics of the call display system are:
-
call, by means of a pushbutton, with permanent visible signal and temporary sound signal;
-
display of the corresponding number on the display unit, located in a manned place;
-
storage of simultaneous calls and display of the relevant numbers on the display unit, at regular
intervals;
-
erasing of the calls from the manned place;
-
possibility of repeating calls on other display units (repeaters);
-
auxiliary contact for other signaling devices;
-
continuous monitoring of the system;
-
pushbutton-display unit cabling with 2 wires for systems up to 12 calls; with 3 wires for systems up
to 24 calls;
-
permanent storage of calls also in case of power failure;
-
programming of number series.
-
auxiliary contact for other signaling devices;
-
continuous monitoring of the system;
-
pushbutton-display unit cabling with 2 wires for systems up to 12 calls; with 3 wires for systems up
to 24 calls;
-
permanent storage of calls also in case of power failure;
OUT
art. 392001
art. 392002
art. 331211
4
Publicité
