Aqua Medic aquarius 30 Mode D'emploi page 5

In purchasing this unit, you have selected a top quality product. It has been specifically designed for aquarium
use and has been tested by experts. High quality components and newest technology as well as modern design
guarantee that you will enjoy your aquarium lighting for many years.
1. Technical Data
LED aquarium light for saltwater aquaria
The aquarius light is made of high quality aluminium in a slim design which offers even illumination of your
aquarium. The compilation of the six individual light colours can be specifically adjusted to the needs of
saltwater aquaria. The light has preparation for connecting a
adjustment of light colour, light intensity and light settings
Equipment:
- LED light with 6 colours
Prepared for connecting a
-
- Anodized housing made of aluminum
- For safety 24 V with external transformer (100 - 240 V / 50 - 60 Hz)
- Adjustable holder for fixing onto the aquarium
Optional:
- aquafit II steel wire suspension
Total
aquarius
consumption
30 max. 32 W
60 max. 65 W
90 max. 95 W
120 max. 128 W
2. Unpacking
Control the lighting system immediately after unpacking with respect to any damages. In case of complaints,
please contact your dealer directly.
Included in shipment:
aquarius incl. power pack 24 V DC output
•
Aquaria fixing (please refer to pict. 2)
•
4 screws for fixing the optional wire suspension aquafit 2
•
3. Safety advices
The lighting system cannot be used as aquarium cover. It has to be mounted only above the aquarium.
•
When using the wire suspension aquafit 2 (not included in shipment), the minimum distance between
lighting and aquarium should be at least 30 cm.
The housing may become hot during operation. Be cautious when touching it! For cleaning, disconnect
•
the light from the mains and let it cool down. Afterwards, take the light down.
When cleaning, take care that no humidity passes the ventilation slits and enters the interior of the lighting
•
system!
Pay attention to a sufficient thermal exchange. Keep ventilation slits always free! Do not mount the system
•
in enclosures or behind panels. Missing aeration may result in overheating and damage electrical
components. When used under a cover, one or more permanently running fans with sufficient
power are required. Otherwise, overheating or corrosion due to condensation may occur.
Do not try to repair the lighting system. Please send it in for checking, preferably with a list of defects and a
•
copy of invoice, if applicable. Also, broken LEDs can be exchanged only by the manufacturer.
When working on the light, always pull all power plugs.
•
Operation manual ENG
6-channel controller
for cooling passively (no fans)
Total
Dimension (l x w
LED
x h)
lumen
320 x 210 x 25
2,080 lm
mm
580 x 210 x 25
4,160 lm
mm
840 x 210 x 25
6,240 lm
mm
1,100 x 210 x 25
8,320 lm
mm
6-channel controller
possible.
For aquaria Light
(length) colours
white
350 - 600 mm
royal
blue
600 - 900 mm
blue
850 – 1,100
red
mm
purple
1,150 – 1,350 UV
mm
which makes individual
Colour temperature
6,000 – 6,500 K
450 - 455 nm
460 - 465 nm
620 - 625 nm
395 - 405 nm
365 - 370 nm
5