Type "B11" Appliance (See Data Plate); Observations And Advice; Cleaning And Maintenance; What To Do In The Event Of A Breakdown - Lotus F13-74G Instructions Pour L'installation Et L'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Type "B11" appliance (see data plate)

1) Natural Discharge (fig.3)
Connection to a chimney with natural draught made reliably efficient by means of an anti-wind fitting and discharging
the products of combustion directly outside.
2) Forced Discharge (Fig.4)
The gas supply to the appliance must be directly interlocked to the system of forced discharge and must cut off
automatically in the event that its capacity goes below the values prescribed by item 4.3 by the UNI-CIG norm 8723.
Supplying the appliance with gas again must only be possible manually.
In the event of installation under a hood, the end part of the discharge pipe of the appliance must be at least 1.8 m from
the surface on which the appliance is placed (ground). The section of the discharge pipe outlet must be placed inside the
perimeter of the hood's base.
NATURAL EVACUATION Fig. 3
1) Anti-wind (blowback) chimney
Type "B11" appliances are supplied upon request with chimney or chimney and anti-wind (blowback) device to be
assembled and delivered separately.
The oil must be filtered at regular intervals to eliminate the residue. Doing this frequently improves the quality of the
frying and makes the oil last longer. Keep the level of the oil checked and top it up every time it goes below the MIN
level mark. Do not use the appliance without oil.
Use the appliance only under surveillance.
Daily cleaning after switching off the appliance ensures the perfect functioning and long life of the appliance.
The parts in steel must be washed with hot water and neutral detergent, then rinsed thoroughly in order to eliminate all
traces of detergent; after which, dried with a dry cloth.
Do not use abrasive or corrosive detergents.

WHAT TO DO IN THE EVENT OF A BREAKDOWN

Turn off the gas tap and notify the after sales service.
PROCEDURE TO FOLLOW IF THE APPLIANCE IS NOT GOING TO BE USED FOR
Turn off the gas tap and clean the appliance as specified above.
IT
GB

OBSERVATIONS AND ADVICE

CLEANING AND MAINTENANCE

SOME TIME
37
CH
IE
FORCED EVACUATION Fig. 4
1) Extractor hood
2) Interlocking

Publicité

Table des Matières
loading

Table des Matières