Cooling Function - RADSON 51043 Guide D'utilisation

2.1.6

Cooling Function

Use this function if you don't need cooling function on the selected
zone.
Example: Cooling function should be deactivated for room with
residual humidity, like Bathroom, kitchen...
- Select the line with the arrow cursor and Press (Ok) to choose
"Yes" or "no".
- If you choose "Yes", two supplementary lines must be appears,
these two lines will be used to adjust the settings temperatures which
must be followed in cooling mode.
Comfort setting
- Adjust here the setting temperature which must be followed by the
concerned zone during the day in cooling mode (summer).
Reduced setting
- Adjust here the setting temperature which must be followed by the
concerned zone during the night in cooling mode (summer).
Monday 27 / 04 / 2009
11 :15
22.6
33%
Zones TH1
Working Mode
Program
ITCS
 Cooling Function No
Zones TH1
ITCS
 Cooling Function Yes
Day
Night 24.0°C
(default value 22.0°C)
(default value 24.0°C)
23
°C
ITCS
No
No
22.0°C