RADSON 51043 Guide D'utilisation page 20

The day in negative are already programmed, now you can choose
another group of day for programming, to select or deselect the day
move the underline cursor under the desired day with (◄-) or (►+)
and press (OK). The days selected, ready for programmed must be
blink. Then move your underline cursor on the arrow icon with (►+)
and press (Ok) to continue the procedure.
Note:
You could also retake a day already programmed to reprogram it.
Example:
- Selected days are Saturday and Sunday (2 last days of the week)
- To program these two days repeat the same procedure, described
below.
- When the program is finished, you should have this message:
Then press (Ok) to view and check the graphic of the program.
Day selection
Mo Tu We Th Fr
Mo Tu We Th Fr
1
00 : 00
Program
Successfully created
20
Sa Su
Sa Su