Heat & Cool Mode - RADSON 51043 Guide D'utilisation

Important:
All programs, installation configuration will be lost. Ensure that you
have all needed element to reconfigure before using this function.
5 Heat & Cool Mode
This menu will only available if your installation is adjusted in heating
& cooling mode with Manual change.
To change the working mode of the installation, move the navigation
cursor in front of the desired line and Press (Ok) to enter in the
submenu.
Then you can choose with (◄-) or (►+) the working mode of the
installation.
You can see the working mode of your installation on the main
screen on the right of the status line.
Heating mode.
Generally use for winter season.
Cooling mode.
Generally use for summer season.
Menu
Zones menu
Special function
Main settings
 Heat & Cool Mode
Heat & Cool mode
 Heating
Cooling
38
