Special Function; Software Version; Information Screen - RADSON 51045 Guide D'utilisation

4

Special Function

4.1 Software version:

Displayed during the initialization at power on or in the factory
setting menu.

4.2 Information screen:

By pressing on the information logo (from the main screen or from
the zone menu) you will have a clear message to inform you about
the status of your installation.
This logo is displayed when your installation is Ok.
Following your installation this green Warning logo will
show you different messages to inform you about,
- ITCS function activated (only available from zone menu).
This logo is used to show you important things in your
installation.
- Floor Limitation indication when regulating zone is used
in combination with a floor sensor.
- Humidity level is reach when humidity sensor is
connected.
This logo is used to show you the critical error of your
installation:
- Lost thermostat information.
- Lost receiver information.
- Error of the different sensor connected on this unit.
- GSM error, only if a GSM module unit is connected.
(Check the leaflet of GSM unit to have more details about
the error message)
40