grandimpianti AS 27 Mode D'emploi page 20

www.groupdynamics-laundry.com
sales@groupdynamics.lv
the available characters will be viewed, which can be selected using the "UP" and "DOWN"
keys. Confirmation is automatic.
To move the cursor inside a word that is being entered use the "UP" and "DOWN" keys.
To delete a letter, point it with the cursor and press "START".
When the desired text has been keyed in, confirm by "ENTER" and exit by pressing the
"MODE" key.
3-A-1-2 STEPS
Move to the "STEPS" field using the "UP" and "DOWN" keys.
Confirm the selection by "ENTER".
The first step associated to the currently selected cycle will then appear, i.e. step N° 01, which is
displayed in big print.
The number assigned to the step along with the relevant type and comment will be displayed in
small print too.
The steps composing the currently selected cycle and the sequence of actions associated thereto
can be scrolled using the "UP" and "DOWN" keys: for example, soak, prewash, wash and
intermediate short spin, rinse and so on until the last scheduled step is viewed.
A program can hold up to maximum of 25 steps. Free steps will be marked "NOT
PROGRAMMED".
Select the step to be altered using the "UP" and "DOWN" keys and confirm by "ENTER". The
display will list the following entries:
CHANGE
CANCEL
INSERT BEFORE
INSERT AFTER
Change: press "ENTER" to confirm if you wish to change the step currently selected. Select the
step with which you wish to replace the currently selected step using the "UP" and "DOWN"
keys. Then confirm by "ENTER".
The programmer will next display the "COPY?" prompt. Press "ENTER" to confirm the change
or either press "MODE" to cancel it.
Cancel: press "ENTER" to confirm that you wish to cancel the currently selected step. The
programmer will next display the "CANCEL?" prompt. Press "ENTER" to delete the step or
either press "MODE" to cancel the change.
Warning! The "CANCEL" command does not erase steps from the programmer but only from
the sequence associated to the program selected. The steps cancelled can be selected again, re-
entered or changed as desired.
Insert before and after: press "ENTER" to confirm that you wish to insert a step before or after
the currently selected step. Select the step to be inserted before or after using the "UP" and
"DOWN" keys and then press "ENTER" to confirm.
To cancel the insertion, press "MODE".
3-A-1-3 TYPE
Move to the "TYPES" field using the "UP" and "DOWN" keys.
Confirm your selection by pressing "ENTER".
The display will list the following entries:
Page 20/36 utilisation d1500 fr-EN.1 par PS le 08/04/2005