grandimpianti AS 27 Mode D'emploi page 15

www.groupdynamics-laundry.com
sales@groupdynamics.lv
1 OPERATION
As soon as the washing machine is switched on, the display reads the software version installed
and the software release date for a few seconds.
Caution!
The release date refers to the software installed and has nothing to do with machine assembly or
testing and is no reference date for guarantee purposes.
The display then lists various details, i.e, from top left:
- the number denoting the program selected.
- the maximum wash temperature that the program achieves.
- the length of the whole program, including water intaking and draining, heating and cooling
down. These values are effective cycle lengths as stored in memory, basing on real operation.
They are intended as references and have no influence on cycle completion.
- cycle type, i.e. whether it is delicate, medium or strong.
- program name, e.g. whites, woolens, curtains etc.
- the words "waiting for START" if the door is closed or "door open" if it is open.
When either the "UP" or "DOWN" key is pressed, the display reads the steps composing the
wash program for a few seconds.
Program selection and consequently all the relevant details, incl. maximum temperature, total
cycle time, can be changed by pressing the "SELECT" plus either the "UP" or "DOWN" key
after introducing your pass word (6 times ECO key in standard). All indicated values refer to the
new program selection.
When the door is closed, the "door open" reading is dismissed and the "waiting for start" reading
intervenes. The program selected can now be started by simply pressing the "START" key.
On cycle start the display reading change as follows.
In other words, the display then reads the various steps composing the cycle as they are carried
out, from the first to the last scheduled step. All steps are displayed in large print along with the
relevant symbol and are clearly visible.
The display alternates the step name with the time remaining to the end of cycle, which
decreases as the program goes on. The number and name corresponding to the step in progress
are displayed in small print.
During step execution, the display keeps signalling any events concerning the cycle in progress
by the use of symbols.
For example, as illustrated in the figure, the top left corner of the display reads various symbols
that provide information on the water level in the tub, on soap pumps operation, heating and
draining.
At the end of the wash program the display reads the event clearly and enables the buzzer.
Straight afterwards the "open door" message appears and it is possible to remove the washing
from the machine.
Page 15/36 utilisation d1500 fr-EN.1 par PS le 08/04/2005
ENGLISH