After Ironing; Cleaning And Maintenance; Cleaning The Soleplate - Rotel profplus U980CH1 Mode D'emploi

part you are going to iron so that the garment cannot swing back and forth. The
soleplate must make complete contact with the material. Now press the steam
button until the garment is smooth.
 AFTER IRONING
o
COMPLETELY EMPTY the water tank after EACH use!
o
To avoid limescale build up, empty the appliance after each use. Prior to emptying
the appliance, turn it off and pull the power plug out of the socket.
o
Set the switch (7) to "0."
o
Pull the power plug out of the socket.
o
Press the steam button (4) to discharge the steam pressure
o
Caution! Let the iron cool off (approx. 2 hrs).
o
Remove the safety cap (1) using the cap screw (3), turn the iron upside down to
empty the water remaining in the boiler (Fig. E). Proceed carefully, because the
water is boiling hot. This simple procedure will likewise assist in always maintaining
a clean boiler interior.
o
When you have finished ironing, never completely tighten the safety cap (1), but
rather close it with 3-4 turns.
o
Turn the steam regulator (2) counter-clockwise as far as it will go.
 CLEANING AND MAINTENANCE
o
Caution! Before you clean your iron, pull the power plug out of the socket and let
the iron cool off.
o
Never immerse the appliance in water or other liquids. Regularly check the power
cord for damage before using your iron. Should you detect any damage, take it to
your nearest customer service and let it be replaced by a qualified specialist.
 CLEANING THE SOLEPLATE
o
Deposits and other fabric residues can be removed from the soleplate using a cloth
moistened in a water and vinegar solution. Use a dry cloth to wipe the soleplate
dry.
o
Do not use a scouring agent to clean the soleplate. Ensure that the soleplate
remains smooth: avoid contact with metal objects.
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use