Brandt BD8712NWX Manuel D'instruction page 20

3 - USING THE APPLIANCE
3.4 - S
WITCHING ON THE APPLIANCE AND SET
TINGS
Press and hold the "power/off" button for a few
seconds.
Two temperatures display on the screen. Your
appliance is initially configured to operate at ave-
rage temperatures of 4°C for the fridge compart-
ment and -18°C for the freezer compartment.
In order to limit power consumption, the display
switches off after a few seconds. It will light up
again when opening the appliance or by pressing
any key.
3.5 - S
ETTING THE FUNCTIONS
— To activate a function, press the corresponding
button, a beep confirms the selection and the but-
ton stays lit.
— To deactivate a function, press the corresponding
button, a beep confirms the deactivation and the
button switches off.
3.6 - F
RIDGE SETTINGS AND FUNCTIONS
Setting the Fridge Temperature
Select the fridge compartment using the "ZONE"
key, the temperature flashes.
You can then set the temperature to the closest
degree from 1°C to 8°C, using the + and - keys. You
may press "ZONE" again to confirm your selection,
or the latter is automatically taken into account after
a few seconds.
EN
(continued)
-
"Holiday" function
Enables you to leave your appliance on during your
absence by maintaining a temperature of around
12°C in your fridge. This enables you to preserve
the food stored in the freezer as well as avoid any
unpleasant smells from occurring and limit your
electricity consumption. However, remember to
remove perishable goods from the fridge compart-
ment.
The « » symbol lights up and "Ho" displays ins-
tead of the temperature when the function is activa-
ted.
When you deactivate the function, the «
flashes until the actual temperature of the fridge
reaches the set temperature.
"Booster" function
This function temporarily lowers the fridge tempera-
ture to regain the optimal storage temperature quic-
ker (door open for a prolonged period, or when
stocking products, etc.). Ideally, use this function to
anticipate the arrival of your shopping. Remember
to activate this function approximatively 3 hours
ahead.
The «bo» symbol appears instead of the fridge tem-
perature when the function is activated.
Automatically stops after 6h or manually by deacti-
vating the function.
3.7 - F
REEZER SETTINGS AND FUNCTIONS
Setting the temperature
Select the freezer compartment using the "ZONE"
key, the temperature flashes.
You can then set the temperature to the closest
degree from -15°C to -24°C, using the + and - keys.
You may press "ZONE" again to confirm your selec-
tion, or the latter is automatically taken into account
after a few seconds.
20
» symbol