A.15 Maschine.ini - Siemens SINUMERIK 840Di sl Manuel De Mise En Service

Liste des fichiers INI

A.15 MASCHINE.INI

A.15 MASCHINE.INI
Vue d'ensemble
Les droits d'accès relatifs aux modes de fonctionnement sont définis dans la section
[ACCESSLEVEL] du fichier MASCHINE.INI.
[ACCESSLEVEL]
;
; 7 = Keyposition 0 everyone in front of the machine,
; Suggestion: Permission only tfor NC-start, no selection of part-
program
; 6 = Keyposition 1 operator of the machine, the man at the shop-
floor
; of production
; Suggestion: Permission to select Part-Program, no editing
; 5 = Keyposition 2 machine setter (more experienced),
; the one to setup tools and test and run in new Part-Programs
; Suggestion: Permission to modify (edit) Part-Programs
; 4 = Keyposition 3 not yet used, same permissions as 5
; 1 = only manufacturer of machine, System specialist
; 0 = only manufacturer of Numeric Control (Siemens Experts)
; at the state of delevery al users got (nearly) all permissions for
work
JOG_PRESET=7 ; Preset or Set actual value at mode JOG mode ==>5
Suggestion machine setter
JOG_HAND=7 ; Handweel at mode JOG
==>6 Suggestion operator
JOG_ANKRATZ=7 ; Scratch
==>6 Suggestion operator
JOG_INCREM=7 ; Set increment at mode JOG
==>6 Suggestion operator
JOG_SYNAKT=7 ; Synchron actions at mode JOG
==>5 Suggestion machine setter
JOG_V_ISTW=7 ; watch windows of Actual-values,
==>7 Suggestion everyone
; Spindels, G-Functions, Aux.-Functions,
; Feedrate, Tools or Axis-feedrate at mode JOG
JOG_V_ZOOM=7 ; Zoom actual values at mode JOG
==>7 Suggestion everyone
JOG_INCHMET=7 ; Switch inch/Metric at mode JOG
==>6 Suggestion operator
REF_SISITEC=4 ; Commit safety integrated Ref.Point
==>4 clés 3 pour demeurer compatible
MDI_PROGBE=7 ; Program control at MDI mode
==>6 Suggestion operator
302
Manuel de mise en service, 03/2009, 6FC5397-0DP10-3DA0
HMI-Advanced (IM4)