Front Wheels; Cup Holder - Maxi-Cosi Kaia CV254 Mode D'emploi

3 Front Wheels
Align slot on stroller to tab on
front wheel. Press front wheel
into stroller frame until it "clicks"
(Figure 3). NOTE: Front wheels
are interchangeable.
To remove front wheels, press a small flat
head screwdriver into slot on inner side
above each wheel (Figure 3a). Pull wheel
out.
4 Cup Holder
Align slot to post on stroller. Rotate and
push down to lock into place (Figure 4).
NOTE: Reverse procedure to remove.
CAUTION:
• Never hang parcels or accessories from
the cup holder as the stroller may tip
over.
• Never place more than 1-LB (0.5-kg)
in the cup holder.
5 Canopy
Push canopy forward and ensure each side
is clipped securely. Canopy can be locked
open by pulling canopy forward.
To remove canopy, lift tab on clip at each
side of the canopy (Figure 5). Unfasten
hook-and-loop patches (Figure 5a).
NOTE: Reverse procedure to attach.
Assembly
3
Tab
3
4
5
3a
5a