Maxi-Cosi Kaia CV254 Mode D'emploi page 11

WARNING
To avoid serious injury:
• Please refer to the manufacturer's instructions
for the use of your infant car seat.
• ALWAYS install car seat facing to the rear
of the stroller.
• ALWAYS use the restraint system in the car
seat.
14 To Attach Maxi-Cosi Mico
Prezi Infant Car Seat
TM
NOTES:
• Push the parking brake down.
• Recline seat.
• If desired, remove stroller seat by following
step 14.
To access car seat adapter slots, detach
center seat fastener by pulling up on fabric
above each seat fastener on each side
(Figure 14).
Align car seat adapters with "ribs" facing
inward as shown. Press adapters into slots
(Figure 14a), then slide down until they
"click" (Figure 14a).
Car seat must face the
handlebar.
Lower car seat onto
adapters until both sides "click" (Figure 14b).
To remove Prezi TM , pull release behind car
seat and lift up (Figure 14c).
To remove Mico car seat, press both buttons
on car seat (Figure 14d). Lift car seat up.
To remove car seat adapters, push tab
as shown, then slide upward and remove
(Figure 14e).
To Use
9
and
®
Mico
TM
Prezi
14
Prezi
14b
Mico
14c
14a
TM
14b
14d
14e