SilverCrest SV 125 C3 Mode D'emploi page 14

NOTE
The bag opening must lie flat on the welding wire 4. Otherwise the weld-
►
ing does not work properly.
4) Close the appliance lid 1. The press seal q presses the bag onto the welding
wire 4, to create a smooth seam. Ensure that both corners of the appliance
lid 1 click closed. If necessary, press them down once again on the markings
and
5) Press the
process is completed, the control lamp w flashes briefly and then goes out.
NOTE
► You can halt the sealing process at any time by pressing the
again. The control lamp w flashes and then goes out.
SV 125 C3
so that the appliance lid 1 clicks into place and locks shut.
button w. The control lamp w lights up. As soon as the sealing
button w
GB │ IE │ 11 ■