Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EXTENSION CORDS
Use proper extension cords.
Make sure your extension cord is
in good condition and is a 3-wire extension cord
which has a 3-prong grounding type plug and
matching receptacle which will accept the
machine's plug. When using an extension cord,
be sure to use one heavy enough to carry the
current of the machine. An undersized cord will
cause a drop in line voltage, resulting in loss of
power and overheating. The table shows the
correct gauge to use depending on the cord
length. If in doubt, use the next heavier gauge.
The smaller the gauge number, the heavier the
cord.
KEY FEATURES AND COMPONENTS
1. Cast iron table
2. Spindle tilt wheel
3. Spindle tilt lock
4. Power switch
5. Spindle storage
6. 4" Dust port (not visible)
7. Table insert storage
8. Interchangeable table insert
9. Tilting sanding spindle
®
The DELTA
Heavy Duty Oscillating Floor Spindle Sander is designed for sanding or polishing flat, round, or curved
surfaces on wood, plastic materials.
FUNCTIONAL DESCRIPTION
MINIMUM GAUGE EXTENSION CORD
RECOMMENDED SIZES FOR USE WITH STATIONARY ELECTRIC MACHINES
Ampere
Volts
Total Length
Rating
of Cord in
0-6
120
up to 25
0-6
120
0-6
120
0-6
120
100-150
6-10
120
up to 25
6-10
120
6-10
120
6-10
120
100-150
10-12
120
up to 25
10-12
120
10-12
120
10-12
120
100-150
12-16
120
up to 25
12-16
120
12-16
120
GREATER THAN 50 FEET NOT RECOMMENDED
6
Gauge of Extension
Cord
Feet
18 AWG
25-50
16 AWG
50-100
16 AWG
14 AWG
18 AWG
25-50
16 AWG
50-100
14 AWG
12 AWG
16 AWG
25-50
16 AWG
50-100
14 AWG
12 AWG
14 AWG
25-50
12 AWG
Publicité
Table des Matières
