Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ExTENSION CORdS
Use proper extension cords. Make
sure your extension cord is in good
condition and is a 3-wire extension cord which has a
3-prong grounding type plug and matching
receptacle which will accept the machine's plug.
when using an extension cord, be sure to use one
heavy enough to carry the current of the machine.
An undersized cord will cause a drop in line voltage,
resulting in loss of power and overheating. The table
shows the correct gauge to use depending on the
cord length. If in doubt, use the next heavier gauge.
The smaller the gauge number, the heavier the cord.
kEY FEATURES ANd COMPONENTS
1. Cast iron tilting table.
2. On-board spindle storage
3. 2" dust port with 4" adapter
4. Power switch
5. Sanding spindle
6. Interchangeable table insert
7. Table tilt lock levers
MINIMUM gAUgE ExTENSION CORd
RECOMMENDED SIZES FOR USE WITH STATIONARY ELECTRIC MACHINES
Ampere
volts
Total Length
Rating
of Cord in
0-6
120
0-6
120
0-6
120
0-6
120
6-10
120
6-10
120
6-10
120
6-10
120
10-12
120
10-12
120
10-12
120
10-12
120
12-16
120
12-16
120
12-16
120
gREATER THAN 50 FEET NOT RECOMMENDED
FIg. 1
6
gauge of Extension
Cord
Feet
up to 25
18 Awg
25-50
16 Awg
50-100
16 Awg
100-150
14 Awg
up to 25
18 Awg
25-50
16 Awg
50-100
14 Awg
100-150
12 Awg
up to 25
16 Awg
25-50
16 Awg
50-100
14 Awg
100-150
12 Awg
up to 25
14 Awg
25-50
12 Awg
FIg. C
Publicité
Table des Matières
