Optional Accessories - Makita DF001D Manuel D'instruction

The tool can be used in two ways; a straight shape and
a pistol shape which are selectable according to the
conditions of workplace and screwdriving.
Screwdriving operation
Place the point of the driver bit in the screw head and
apply pressure to the tool. Then switch the tool on.
When the screw head and surface of the workpiece
becomes flat, release the switch.
NOTICE:
Make sure that the driver bit is inserted
straight in the screw head, or the screw and/or bit
may be damaged.
NOTE: When driving wood screw, predrill a pilot hole
2/3 the diameter of the screw. It makes driving easier
and prevents splitting of the workpiece.
Using the tool as a hand screwdriver
Switch off the tool, and then turn the tool.
MAINTENANCE
CAUTION:
Always be sure that the tool is
switched off before attempting to perform inspec-
tion or maintenance.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
Disposing of tool
A Li-ion battery is built into this tool. When disposing
of the tool, be sure to bring it to Makita Authorized or
Factory Service Centers to recycle the built-in battery.
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Driver bits
• Socket bits
• AC adapter and USB cable
• Plastic carrying case
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
6 ENGLISH