Blatchford TT Pro Instructions D'utilisation page 14

Liability
The manufacturer recommends using the device only under the specified conditions and for
the intended purposes. The device must be maintained according to the instructions for use
supplied with the device. The manufacturer is not liable for damage caused by the component
combinations that were not authorized by the manufacturer.
CE Conformity
This product meets the requirements of 93/42/EEC guidelines for medical products. This
product has been classified as a Class I Product according to the classification criteria outlined in
Appendix IX of the guidelines. The Declaration of Conformity was therefore created by Blatchford
Products Limited with sole responsibility according to Appendix VII of the guidelines.
Warranty
This device is warranted for 24 months.
The user should be aware that changes or modifications not expressly approved could void the
warranty, operating licenses and exemptions.
See the Blatchford website for the current full warranty statement.
Environmental Aspects
This product is constructed from recyclable materials. Where possible the components should be
recycled in accordance with local waste handling regulations.
Manufacturer's Registered Address
Blatchford Products Limited, Lister Road, Basingstoke RG22 4AH, UK.
TTPro and Blatchford are registered trademarks of Blatchford Products Limited.
938416/3-1019
14