EHEIM CO2SET 200 Mode D'emploi page 15

b Pressure regulator with: A adjustment knob B connection thread M 10x1 C hose connection
D fine control valve.
c CO diffuser with: G screw cap H gasket I diffuser plate J bubble counter K check valve
2
Q 2x elbow.
d CO - long-term test: M cap O gasket and color contrast band P bottom part with siphon.
2
e indicator fluid.
f CO
- SAFE safety hose.
2
CO SET 400
2
a CO
- Returnable bottle with 500 g CO
2
b Pressure regulator with: A adjustment knob B connection thread M 21.8x1/14" C hose connection
D fine control valve E manometer bottle pressure gauge F manometer system pressure gauge.
c CO - diffuser with: G screw cap H gasket I diffuser plate J bubble counter K check valve
2
Q 2x elbow.
d CO - long-term test: M cap O gasket and color contrast band P bottom part with siphon.
2
e indicator fluid.
f CO
- SAFE safety hose.
2
g Bottle holder.
CO SET 600
2
a CO
- Returnable bottle with 2.000 g CO
2
b Pressure regulator with: A adjustment knob B connection thread M 21.8x1/14" C hose con-
nection D fine control valve E manometer bottle pressure gauge F manometer system pressure
gauge.
c CO - diffuser with two parts: J bubble counter with K check valve L diffuser R silicon ad-
2
apter.
d CO - long-term test: M hood O gasket and color contrast band P bottom part with siphon.
2
e indicator fluid.
f CO
- SAFE safety hose.
2
5. Assembly
Assembly of the pressure regulator
DANGER! POSSIBLE INJURY! – CO
Make sure that the pressure regulator is closed before connection.
Close the fine control valve.
, refillable.
2
, refillable.
2
bottles are under pressure.
2
15