Technical Data - boso nova S Mode D'emploi

8
Taking the Blood Pressure:
Inflate the cuff to above the systolic pressure. The air re-
lease speed can be adjusted by rotating the valve screw.
The World Health Organisation (WHO) recommends a
deflation speed of 2 – 3 mmHg per second.
After the measurement is completed, fully open the ai re-
lease valve to allow for the fast deflation of
the cuff.

Technical Data:

Measurement range: 0 – 300 mmHg
Accuracy of Pressure indication: ± 3 mmHg
Storing conditions:
–30°C – 70°C, 15 – 85% rel. humidity
Operating conditions:
10°C – 40°C, 15 – 85% rel. humidity
Cleaning of Unit and Cuff:
– To clean the unit only use a dry, soft cloth.
– To clean the cuff – remove the rubber bag. The exte-
rior of the cuff can then be washed by hand at a maxi-
mum temperature of 30 degrees Celsius.
Disinfection:
For disinfectant wipes (at least 5 minutes exposure time)
of the device and the cuff, we recommend the disinfectant
liquid microzid liquid sensitiv (Schülke & Mayr).
To disinfect the the cuff, we recommend spray disinfection.
Additional Notes – nova S
Wall Model:
Use the enclosed template to bring the screws into the
correct distance (if necessary use dowels) into the wall.
Hang the device into the screws. Additional accessories:
Spiral tube, template, 2 screws (4 x 35 mm), 2 dowels (6
x 30 mm).
Additional Notes – nova S
Bed Rail Model:
The unit can be fixed to the rail clip for standard rail sy-
stems used in hospitals. This is done by turning the nut