Cleaning And Maintenance; Problems And Solutions; Technical Data - EUROM Brosse de désherbage Mode D'emploi

Operating:
 If all checks are ok, you can insert the plug into the socket.
 Now press the unlocking device (2), press the ON/OFF switch (1) and keep it depressed.
 Release the ON/OFF switch in order to switch the device off. The device will lock
automatically.
Use:
Move the device over the surface area to be treated at a constant speed. For the best results,
you are advised to test the device on a small area first. Check to ensure the tiles are not
damaged.
Only use the device for dry weeds.
Keep the device out of the vicinity of hard objects and plants.
Brush the long edges first and then the short ones.
Do not use the brush in the same spot for too long. The brush will then push into the joints and
will remove the sand/soil.
Regular brushing helps prevent stubborn weeds taking hold.

CLEANING AND MAINTENANCE

Always remove the plug from the socket if you are carrying out maintenance!
The weed brush needs special cleaning.
 Regularly clean the ventilation openings with a soft cloth.
 Regularly remove dirt from the cover with a soft brush.

PROBLEMS AND SOLUTIONS

The brush won't rotate
 Check the cables
 Check the electrical supply.
 Check to ensure the brush is attached properly.
The weeds are not removed
 Replace the brush

TECHNICAL DATA

Power connection
Frequency
Output capacity
Free Speed
Spindle dimension
Weight
Sound (in compliance with EN 60745)
ENVIRONMENT
When your weed brush needs replacing, do not dispose of it with regular household waste but
ensure it is processed in an environmentally-friendly manner by delivering it to an appropriate
waste depot.
Always pull the plug out of the socket
if you establish or intend to solve a problem!
230 Volt
50 Hz.
400 Watt
2800
6 mm
2.4 kg
L
pA
L
WA
88 dB(A)
99 dB(A)
20