Filtration Group EWH 16 Traduction Du Mode D'emploi Original page 16

Fig. 7: Replacing the filter element
 Remove the dirty element and replace it with a new one
(refer to section 0).
IMPORTANT!
Risk of damage to property!
 Be careful not to damage the thread when pulling up
the filter housing.
Risk of injury!
 Make sure the filter housing is held securely in the
retaining ring when you screw it in.
Fig. 8: Reassembly
 Tighten the belts (2).
 The filter housing is pressed against the thread of the
filter head.
Page 6
Translation of the original instructions EWH 16, Filtration Group GmbH, 11.09.18, Mat. No. 72462210, Version 00
WARNING!
Risk of injury!
 Make sure the thread has engaged before releasing
the clip fasteners.
Fig. 9: Screwing in the filter housing
 Screw in the filter housing at least two complete turns.
 Release the clip fasteners (5) of the element change aid.
 Screw in the housing as far as it will go.
 Remove the element change aid.
WARNING!