Storing The Camera Settings In Memory - Presetting Feature - Sony RM-BR300 Mode D'emploi

Storing the Camera
Settings in Memory
– Presetting Feature
Up to sixteen combinations of settings (sixteen
positions), including camera position, zooming,
focusing, and backlighting, can be stored in the memory
of the camera using this unit.
RESET
VALUE
LOCK
RESET
– +
R
PRESET
MODE
BRIGHT
1
SHIFT
9
STD
– + L/R
B DIRECTION
AUTO
FOCUS
AUTO 1
POWER
MANUAL
ONE PUSH
AF
NEAR FAR
4
1
Press the PAN-TILT RESET button to reset the pan/
tilt position.
2
Press the CAMERA button to select the camera
whose settings you want to preset.
3
Adjust the position, zooming, focusing and
backlighting of the camera.
4
Press the SHIFT button for more than one second to
select the function of POSITION 1 to 8 buttons, if
necessary (except the BRC-H900, BRC-H700,
BRC-Z700 and BRC-Z330).
To store in positions 1 to 8, press the SHIFT button
so that the upper indicator lights. The POSITION
1 to 8 buttons can be used for positions 1 to 8.
To store in positions 9 to 16, press the SHIFT button
so that the lower indicator lights. The POSITION 1
to 8 buttons can be used for positions 9 to 16.
SHIFT
5
While holding down the PRESET button, press any
of the POSITION buttons, 1 to 8, in which you want
to store the settings (except the BRC-H900, BRC-
H700, BRC-Z700 and BRC-Z330).
RESET
1
9
PRESET
While holding down
16
GB
Storing the Camera Settings in Memory – Presetting Feature
5 1
PANEL BLACK PAN-TILT ONE PUSH
MENU
LIGHT LIGHT RESET AWB
POSITION
2 3 4 5 6 7 8
10 11 12 13 14 15 16
REV
CAMERA
2 3 4 5 6 7
2
for positions 1 to 8
for positions 9 to 16
Press a POSITION button.
2 3 4 5 6 7 8
10 11 12 13 14 15 16
The settings are stored in the memory of the
camera.
The pressed button flashes during storing. Flashing
stops when storing is completed.
To recall the stored settings
Select the function of the POSITION 1 to 8 buttons by
pressing the SHIFT button for more than one second, if
necessary. Press any of the POSITION buttons, 1 to 8,
in which you have stored the settings.
To cancel the preset memory
Select the function of the POSITION 1 to 8 buttons
using the SHIFT button, if necessary. While holding
down the RESET button, press the POSITION button
from which you want to cancel the settings.
While holding down
RESET
1 2 3
9 10 11
PRESET
The pressed button flashes during canceling of the
settings. Flashing stops when the settings have been
canceled.
Notes
• When the power is turned on, the camera starts with
the settings stored in POSITION 1.
• If you want to retain the previous pan and tilt positions
when the power is turned off and turned on again, store
those positions in POSITION 1.
• When you are storing or canceling the settings in one
POSITION, you cannot call up, store or cancel the
settings in another POSITION.
To select positions 9 to 16 for the BRC-
H900, BRC-H700, BRC-Z700 or BRC-Z330
While holding down the SHIFT button, press the
PRESET button (to store or recall the settings) or the
RESET button (when canceling the settings). The lower
indicator will light and the POSITION 1 to 8 buttons can
be used for positions 9 to 16.
When you release the SHIFT button, the upper indicator
lights and the POSITION 1 to 8 buttons can be used for
positions 1 to 8.
You need not press the SHIFT button for more than one
second to switch the indicator in advance.
Press a POSITION button.
4 5 6 7 8
12 13 14 15 16